How To Enter Service Mode On A Ir 2525 That Won't Boot

Master Power and Control Console Ability

The automobile is provided with two power switches, a main power switch and a control panel ability switch.

How to Plough ON the Chief Power

This section explains how to turn ON the main ability.

Make sure that the power plug is firmly inserted into the ability outlet.

Alert
Do non connect or disconnect the power cord with wet hands, as this may result in electrical stupor.

Plough ON the main power.

Open the main power switch cover.

Press the main power switch to the "I" side.

Shut the main power switch encompass.

The main power indicator on the control console lights when y'all plow ON the main power switch.

Various screens appear when system software is loading.

If you are using a login service, log in using the procedure for the login service you are using.

Note
You can change the default display that appears afterward the machine is turned ON from [Default Screen at Startup] on the Settings/Registration screen. (See "Default Screen at Startup.") If this machine is continued to a powered off Macintosh calculator by USB cable, the figurer may turn on automatically when this machine does. In this case, disconnect the USB cable from the machine. Y'all may also be able to solve this problem by using a USB hub between the automobile and the computer. The response of the buttons and keys may not be optimal immediately after y'all turn ON the main ability of the machine. If yous are using Section ID Management with the Copy Bill of fare Reader-F1, see "Copy Card Reader-F1." If you lot are using Section ID Management, see "Entering the Department ID and Pin." If you are using SSO-H, run across "Login Service."

Note

You can change the default display that appears afterward the machine is turned ON from [Default Screen at Startup] on the Settings/Registration screen. (See "Default Screen at Startup.")

If this machine is continued to a powered off Macintosh calculator by USB cable, the figurer may turn on automatically when this machine does. In this case, disconnect the USB cable from the machine. Y'all may also be able to solve this problem by using a USB hub between the automobile and the computer.

The response of the buttons and keys may not be optimal immediately after y'all turn ON the main ability of the machine.

If yous are using Section ID Management with the Copy Bill of fare Reader-F1, see "Copy Card Reader-F1."

If you lot are using Section ID Management, see "Entering the Department ID and Pin."

If you are using SSO-H, run across "Login Service."

Control Panel Power Switch

If the automobile is idle for a certain period of time, the machine will enter the Automobile Sleep manner to minimize energy consumption.

Press the control panel ability switch to cancel the Sleep manner and resume normal machine operations.

Shutting Down the Machine

This machine performs a process to protect the hard disk drive when the motorcar is shut down.
This enables the machine to be close down safely, even if there are any jobs beingness processed, or a MEAP awarding is running while the machine is shutting downward.

Turn OFF the main power.

Open the main power switch comprehend.

Press the main power switch to the "" side.

Close the main ability switch embrace.

Important
Do not turn the primary ability OFF while using the Fax/I-Fax function. Sending or receiving I-fax or fax documents cannot exist done when the main ability is turned OFF. Data stored in the automobile may exist damaged if the Advanced Space is accessed past another imageRUNNER ADVANCE auto or a reckoner immediately earlier the auto shuts down. The machine may accept some fourth dimension to completely shutdown. Do not unplug the ability cord until the main power indicator of the machine is OFF. If the principal power is turned OFF during scanning or printing, a paper jam may occur.

Important

Do not turn the primary ability OFF while using the Fax/I-Fax function. Sending or receiving I-fax or fax documents cannot exist done when the main ability is turned OFF.

Data stored in the automobile may exist damaged if the Advanced Space is accessed past another imageRUNNER ADVANCE auto or a reckoner immediately earlier the auto shuts down.

The machine may accept some fourth dimension to completely shutdown. Do not unplug the ability cord until the main power indicator of the machine is OFF.

If the principal power is turned OFF during scanning or printing, a paper jam may occur.

IMPORTANT
If you want to turn OFF the principal power and so back ON again, wait for at least x seconds after the main power indicator is turned OFF before turning ON the main power.

NOTE
The machine can receive and print documents from a personal computer when it is in the Sleep way. I-fax and fax documents can too exist received while the machine is in the Sleep manner. You can shut down the auto from the Remote UI using the Remote Shutdown way. For more than data, meet "Shutting Down the Machine from the Remote UI."