How To Service A Nordictrack Treadmill

The application of treadmill lubricant presented here is performed on a particular frame mode. The look of the console or the cosmetic plastics is irrelevant to how this job is performed, as long equally your machine's frame style is closely similar to that shown in the film. The lubricants you can purchase in a store volition not withstand the constant friction and heat generated when using your treadmill.

Parts needed:

One 0.5oz Treadmill Lubricant role #219168, or alternatively
3-Tube Treadmill maintenance lube kit

Steps

Be sure to unplug your treadmill before attempting this maintenance and use only our high-operation lubricant.
Lift upwardly one side of the walking belt and squeeze the lubricant onto the walking lath in a zigzag design. If you purchased a lubrication kit that comes with a wand, apply the lubricant to the wand and drag the wand along one side of the walking board.
Now practice the same to the other side of the walking board.
In one case both sides are lubricated, pull the chugalug 180 degrees so that the lubricant is spread across the underside of the walking belt. The lubricated section of the walking belt should now be underneath the deck, so elevator each side of the walking belt and lubricate the walking board once again following the same steps.
Now, stepping off your treadmill, plug it in and let it run for a couple of minutes to fully spread the lubricant on the nether side of the walking belt.

Always refer to the user's manual for proper lubrication intervals advert ever audit your treadmill for signs of excessive article of clothing. Later applying lubricant to the treadmill belt you may demand to accommodate the treadmill belt tension.